Compare

Please NOTE: Registration is required to place items in cart and to order.
Base price starts at: $87.00
Code: 2G
Availability: Ships same day or next. Click image for options and ordering.

EdSets Sonic Series 2G Headsets
ADVANTAGES:  Simple headset with single cable from headset to
bike. Lower in cost and has same HiFI components as 3G.  Only the
'dongle' is visible at all times.

DISADVANTAGES:  Some helmets may not have space under the
left cheekpad for the 'dongle' and a boom mic mount.  Not for use
in Half/Shorty helmets.  Single cable is more difficult to plug-in since
you cannot see it while the helmet is on.  'Dongle' is not removable
without removing speaker and mic wires, and may touch your shoulder
at times.  Requires adapter for 6-pin systems.

APPLICATIONS: Use in all helmets except half-shell/shorty.  Use 3G
kits for those helmet types. 

Choose our "Surface Mic" for Full Face helmets (see red helmet) and
choose our TAB mount boom mic (internal mounted)  for 3/4 helmets.

For Modular/Flip helmets, we usually recommend the Surface Mic which is
mounted on the inside surface of the front chinbar, but it will travel with the
chinbar up and down.  To use a boom mic that stays in place all the time,
choose our internal "TAB" mount boom mic. NOTE: The chinbar may interfere
with the boom when the chinbar is closed.  Check your helmet before ordering
using a bendable soda straw or pencil inserted between the cheekpad and
helmet shell where you would want your mic to come out.

Basic Kit comes with speakers & pouches, 2G Helmet Harness ('dongle')  and
all installation parts and instructions.  You choose lower cable, mic type
and any other desired options when ordering.  Watch as your price  changes
according to your chosen options.

Please NOTE: Registration is required to place items in cart and to order.
Base price starts at: $60.00
Code: MicSplit
Availability: Ships on second day generally.

GL1800 Microphone Splitter with 2.5mm Mic Plug.  This cable does one simple thing:  It takes the standard Goldwing 1500/1800 mic signal and sends it to the Goldwing system as usual, but also sends an isolated 'copy' of the signal to the Zumo or other device that has a 2.5mm mic input jack.  This transparent approach allows you to use your Intercom, CB, and the Bluetooth Phone features of the Zumo all at the same time without any switching or adjustments, its all just always available. 

Simple use example:  You install the splitter cable, and plug the 2.5mm jack into your Zumo which is sending its output to your AUX input (or Cassette adapter, or after-market AUX input on the 1500).  You are using your CB and Intercom as usual, but a phone call comes in.  You press the 'answer' key on the Zumo touch screen, and the call automatically routes to your headset so you can speak and listen via the phone.  The Zumo will mute down its MP3 or XM radio while the call is in progress, but you can still use your CB and Intercom while on the phone!

Works with Mic Mutes if you have them.  Install on the 'bike side' of Mic Mutes if you want to cut the mic signal to the Zumo, or install on the 'headset side' of Mic Mutes if you want the signal to the Zumo all the time (Ed's preference).  I like to cut the ICOM/CB while on the phone, so it install the cable first, and THEN the Mic Mutes after on the line.

View the Instructions

Please NOTE: Registration is required to place items in cart and to order.
Base price starts at: $20.00
Code: ZumoMic

Wired Microphone for Zumo 550 and similar devices.  This is a popular item for Sport, Sport-Touring and Cruiser riders that use a Zumo 550 with earbuds or other headphones and want a simple way to get a microphone into the helmet to make outgoing phone calls over the Bluetooth capabilities of the 550.

You get your choice of a boom mic that mounts with a 5mm thick 1" square tab with Dual Lock snap-on, snap-off adhesive tape (super strong and "way" durable...) or a surface mounted mic that mounts with a 1" square Velcro pad.  You also get a cable with 2.5mm male plug on one end for the Zumo cradle mic input jack, and a Molex connector on the other end for the microphone to plug into.  Comes with Velcro to 'wrap' around the helmet end of the wire so you can attach the wire and keep the 'load' off the Molex connector.